by Alicia Guarasci Alicia Guarasci

New 3 Stage Finishing System

New 3 Stage Finishing System

New 3 Stage Finishing System for sale. This unit is ideal for small part on part process and corn cob dryer. It is still in its original crates.

Description:

The following equipment quoted is designed to be de-grease, burnish and dry parts with corn-cob. Parts are loaded into the inner channel of either of (2) vibratory over and under machines. Parts are de-greased then the machine is allowed to drain using vacuum assisted drains for pre-set amounts of time. The parts are then burnished and allowed to drain using the vacuum assisted drains, again for a pre-set amount of time. The solutions for both processes are run and collected separately and recirculated to their respective recirculation tank. Parts are dried for a pre-set amount of time and automatically discharged onto a vibratory separator conveyor. Parts and corn-cob are separated and corn-cob is returned to the corn-cob dryer channel by customers. All system processes and functions shall be automatic (with exception of loading) and controlled by a PLC with touch screen interface.

3 stage system

OU-10-15 FB COMBO SPIRATRON:

10 cubic feet maximum operating capacity in inner channel and 15 cubic feet maximum operating capacity in outer (dryer) channel.

Main building component of this tub is certified pressure vessel material.

Top and bottom access door safety switches.

Unique cartridge drive system with adjustable top and bottom eccentric weights.

10HP T-frame motor- 460/3/60. Motor mounted to non-vibrating base. Belt drive to main shaft at 1250 VPM.

Recirculating oil lubrication system for main machine bearing.

Painted Roto-Finishing “Adobe”

Channel A:

Flat bottom, U-shaped process channel, heavy duty welded steel construction, polyurethane lined, (50% additional lining in high wear areas), curved and ribbed wall processing channel.

(3) vacuum assisted drains with 4” polyurethane pop-in drain screens, including a collection tank with effluent retention capabilities. Tank will be divided with a diverter system to direct either the degreasing solution or burnishing solution to its respective side of the tank. Each side of the tank shall have a pump with float switch to transfer solution back to the recirculation tank.

Pneumatic unload door system allows parts to transfer directly to the dryer channel (channel B) upon activation of the unload door controlled by PLC.

Channel B: Flat bottom, U-shaped process channel, heavy duty welded steel construction, straight wall. Pneumatic unload door system to allow complete evacuation of parts and media. Parts and media transfer to a vibratory separator. Separated media is returned to the channel of the machine via customer.

Hot Water Heater for Corncob

Enclosed hot water recirculation system utilizing recirculation heater, pump, y-strainer, thermostat, site gauge and all necessary couplings and plumbing.

Compound flow-through system

Automatic mixing and metering of compound and water insure maximum cleanliness of media and parts. System is composed of an electrically-operated variable delivery compound pump which injects the concentrate into a controlled-flow water line. Both compound and water flow have simple, resettable adjustments. The correct solution arrives automatically pre-mixed at the spray nozzles for dispersion into the parts/media mass (channel A only).

ADDITIONAL EQUIPMENT INCLUDED WITH THE OU-10-15 FB

  • Parts Loading Stand: Gravity work stand for emptying customer’s containers into the OU-10-15 vibratory machine.

OU-3-5 FB COMBO SPIRATION:

3 Cubic feet maximum operating capacity in inner channel and 5 cubic feet maximum operating capacity in outer (dryer) channel.

Main building component of this tub is certified pressure vessel material.

Unique cartridge drive system with adjustable top and bottom eccentric weights.

5HP T-frame motor, 460/3/60. Motor mounted to non-vibrating base. Belt drive to main shaft for 1250 VPM.

Manual grease lubrication for main machine bearing.

Pained Roto-Finish “Adobe”

Channel A:

Flat bottom, U-shaped process channel, heavy duty welded steel construction, polyurethane lined, (50% additional lining in high wear areas), curved and ribbed wall processing channel.

3 vacuum assisted drains with 4” polyurethane pop in drain screens, including a collection tank with effluent retention capabilities. Tank will be divided with a diverter system to direct either the degreasing solution or burnishing solution to its respective side of the tank. Each side of the tank shall have a pump float switch to transfer solution back to the recirculation tank.

Pneumatic unload door system allows parts to transfer directly to the dryer channel (channel B) upon activation of the unload door controlled by PLC

Channel B:

Flat bottom, U-shaped process channel, heavy duty welded steel construction, straight wall. Pneumatic unload door system to allow complete evacuation of parts and media. Parts and media transfer to a vibratory separator. Separated media is returned to the outer channel of the machine by customer.

3 stage system

Hot Water Heater for Corn-Cob

Enclosed hot water recirculation system utilizing recirculation heater, pump, y-strainer, thermostat, site gauge, and all necessary couplings and plumbing.

Compound flow-through system:

Automatic mixing and metering of compound and water to insure maximum cleanliness of media and parts. System is composed of an electrically-operated variable delivery compound pump which injects the concentrate into a controlled flow water line. Both compound and water flow have simple, resettable adjustments. The correct solution arrives automatically pre-mixed at the spray nozzles for dispersion into the parts/media mass. (channel A only)

ADDITIONAL EQUIPMENT INCLUDED WITH THE OU-3-5 FB:

1-Plastic 30 Gallon Drum Dumper:

Loading system consisting of a tilt dumper. Dumper discharge height will be suitable for discharge into inner channel of the OU-3-5 machine.

2 RECIRCULATION TANKS:

1 150-gallon capacity, stainless steel, degreasing compound recirculation tank and (1) 150-gallon capacity, stainless steel, burnishing compound recirculation tank. Includes tank, filter system, recirculation pump automatic makes up system and controls.

2 OPTIONAL COALESCING SYSTEMS:

Coalescing system provides removal of free floating, dispersed and loosely emulsified tramp oils from tanks, complete with the pump and controls.

1 NEMA 12 SYSTEM CONTROL PANEL:

PLC and touch screen interface for multi-step process. 460/3/60, 115-volt control circuit, fused disconnect, overload motor protection, on/off vibratory control, solution system controls, machine hour meter and process timer.

Integration of 2 Customer Equipment

Included motor control and sequencing with machines operation, Fundamental capability of the separation and media handling system is the customers responsibility

3 stage system
3 stage system

 Lease option estimate based on 3 years $ 3,088/mo

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

by Alicia Guarasci Alicia Guarasci

VH1000 Stainless Steel

VH1000 Stainless Steel

*Save over $1000!*

Demo model VH1000 Stainless Steel for sale. This unit includes the following features:

  • 36″W x 30″D x 38″H inside work space  
  • Total machine foot print 40″W x 40″D x  7’H
  • Stainless Steel construction
  • 110V Single Phase Power Supply
  • Waterproof LED lights for better workspace visibility.
  • Safety Door Interlock Switch
  • GFCI Protection Hardwired into main power line
  • High Volume Polyurethane Pump
  • Pump agitation for greater slurry mixing and cleaning effect
  • Production Blast Gun with boron carbide insert
  • 20-120psi @ 15-20 CFM
  • 30 gallons of water and 20lbs of abrasive media needed to charge machine
  • Rated 100% duty cycle
  • 2yr warranty on submersible slurry pump system
  • Minimum 5hp compressor recommended capable of 14-18 CFM or greater

*Turntable not included*

VH1000

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

VH1000
VH1000
VH1000
VH1000
VH1000
VH1000
by Alicia Guarasci Alicia Guarasci

Demo Model Monsoon 3X8 Clean Air Workstation

Demo Model Monsoon 3X8 Clean Air Workstation

Demo Model Monsoon 3X8 Clean Air Workstation with Auto Water Wash Kit for sale. This unit includes the following features:

  • Wet downdraft table system
  • Monsoon 3X8 + Auto Water Wash Kit
  • 230v 3 phase 15.0HP
  • 6500CFM Airflow | Auto water level control system
  • Self-cleaning auto washdown system | Water capacity: 60gal
    Stainless steel #304 construction
  • Mist eliminator after filter, 99% efficient @ 3 microns

Includes:

  • Side & amp; back walls and blue cushion grid matting
  • Clean air workstation: side and back panels 48" high with top cover & light kit
Monsoon 3X8 Clean Air Workstation

 *Lease option estimate based on 3 years $ 912/mo !

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

by Alicia Guarasci Alicia Guarasci

Demo 12” Belt Wash System – Ransohoff

Demo 12” Belt Wash System – Ransohoff

Demo 12” Belt Wash System Ransohoff – wash, rinse and heated blow off for sale. This unit includes the following features:

  • Process Type:  Continuous
  • Production: High Volume
  • Part Orientation: Directly on Flat wire Belt 
  • Max Work Envelope: 12” wide belt, 6” high 
  • Method of Loading / Unloading:  Manual  
  • Footprint: Starts @ 7’ Long x 5’ Wide x 4’-6” High (with 12” wide belt)
  • Cleaning Mechanisms: Spray (Optional Ultrasonics)
  • Drying Mechanisms: High Velocity Air
  • Controls: Relay Logic (Optional PLC / HMI)
Demo 12” Belt wash System Ransohoff

Engineered for lean manufacturing, the LeanVeyor reduces floor space requirements while providing exceptional cleaning and drying performance. We used a commonsense approach to component choice and placement for quick and efficient access and servicing. All stages are insulated and compartmentalized with individually adjustable exhaust dampers, reducing system heat loss.

This is a wash rinse heated blowoff.  PLC wash, rinse filters, chip baskets, marine doors with auto water fill.  We would configure the machines blowoff and risers to match the parts.  Oil control can be added if needed.

*As is, where is, Cincinnati, OH

Lease option estimate based on 3 years $3,450/mo

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

by Alicia Guarasci Alicia Guarasci

Demo Rotary Basket System – Ransohoff

Demo Rotary Basket System – Ransohoff 

Demo Rotary Basket System – Ransohoff  (RB2) with ultrasonics for sale. This unit includes the following features:

  • Cleaning Sequence: Wash, Rinse & Dry
  • Process Type: Batch or Continuous (Automation Available)
  • Part Orientation:12” x 18” x 6” Basket or Custom Fixture
  • Production: Up to 10 Cycles, 20 Baskets Per Hour (Fully Adjustable)
  • Max Work Envelope:15” x 15” x 24” Long (Standard)
  • Method of Loading / Unloading:
  • 20” x 20” x 36” Long (Custom)
  • Cleaning Mechanisms:
  • Manual or Automatic (Automation Available)
  • Footprint:8’-9” Deep, 4’-9” Wide, 5’-4” High
  • Spray / Immersion / Turbulation / Ultrasonics / Rotation
  • Drying Mechanisms: High Velocity, Heated Air with Rotation
  • Controls: Programmable Controller & HMI Touch screen
Demo Rotary Basket System Ransohoff

The LeanJet® RB-2 immersion cleaning system processes two (2) baskets of parts per cycle, up to twenty (20) baskets per hour. The RB-2 carriage can be easily modified to accommodate much larger parts. Designed to fit into your work cell area or a smaller production environment, the Lean-Jet RB-2 immersion cleaning systems clean using our patented washing and rinsing process of agitation, spray impingement, rotation, hydraulic purging through immersion, and heated blow-off drying. Our “triple action” batch cleaning process was developed specifically to process a broad range of challenging parts, especially those with internal bores and passages. In addition, the RB-2 parts washer is designed to be equipped with ultrasonics if needed. Totally enclosed self-ventilating process – operator is not exposed to vapors or mists found in other cleaning processes.

As a standard design this cell washer processes parts in the industry standard Kadon style basket designed to hold and protect your delicate parts during the entire cleaning process. Our carriage can be modified to accommodate your current baskets or new, custom fixtures. The RB-2 is a scalable platform that can be easily modified to accommodate much larger parts.

Standard, PLC, filters in wash and rinse, auto fills, regen fan with filter monitor, marine doors and full enclosure.

*As is, where is, Cincinnati, OH

Lease option estimate based on 3 years $4,170/mo 

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

by Alicia Guarasci Alicia Guarasci

Demo 24” Belt Wash System – Ransohoff

Demo 24” Belt Wash System – Ransohoff

Demo 24′ Belt Wash System for sale. Engineered for lean manufacturing, the LeanVeyor reduces floor space requirements while providing exceptional cleaning and drying performance. We used a commonsense approach to component choice and placement for quick and efficient access and servicing. All stages are insulated and compartmentalized with individually adjustable exhaust dampers, reducing system heat loss.

  • Process Type:  Continuous
  • Production: High Volume
  • Part Orientation: Directly on Flat wire Belt 
  • Max Work Envelope: 24” Wide x 12” High
  • Method of Loading / Unloading:  Manual  
  • Footprint: Starts @ 7’ Long x 5’ Wide x 4’-6” High (with 12” wide belt)
  • Cleaning Mechanisms: Spray (Optional Ultrasonics)
  • Drying Mechanisms: High Velocity Air
  • Controls: Relay Logic (Optional PLC / HMI)
Demo 24” Belt wash System Ransohoff

Wash, rinse, regen blowoff followed by a heated blowoff.  PLC, HMI, flat wire belt. Auto water fill, chip baskets, adjustable height air knives, marine door for cleaning out of tanks.

*As is, where is, Cincinnati, OH

Lease option estimate based on 3 years $5,995/mo

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

by Alicia Guarasci Alicia Guarasci

Supercharger Wet Blasting Success

Wet Blasting Success

Before

After

super charger before
super charger after

Terry Hopkins (Blast & Wash System’s President) spoke to me about an automotive rebuild shop that he had visited. Terry knew that the wetblast process is an excellent way to clean, peen and shine aluminum parts. After discussing the project with Terry we both felt that we should put-our-best-foot-forward which in this case meant getting some parts into my lab for blasting.

Parts arrived a few weeks later. There was a combination of aluminum parts including a turbo charger and super charger parts. We asked the customer to send the parts as disassembled without any pre-cleaning. The beauty of the wetblast process over dry is as follows.

  • Precleaning is not necessary. Wetblast cleans and filters oil and scum whereas a dry blast machine would plug up very quickly.
  • The wetblast process is much more consistent over dry. The slurry fed to the blast gun is blended so well that you eliminate the “hot spot” streaks that you often see in dry blast
  • No more airborne dust all over your shop!!!!

The parts were all done in less than five minutes each. The scum just made its way out to the closed loop rinse system where it was filtered. The blasted surface is “peened” so no more fingerprints or oil stains. Any oil or contamination will just wipe right off. Nine times out of ten the parts are much better than from the factory.

Written by Rick Paul from wetblasting.com

For additional information, please feel free to Contact Us.

VH
by Alicia Guarasci Alicia Guarasci

Goff 3672 Spinner Hanger With 4 Blast Wheels

Goff 3672 Spinner Hanger With 4 Blast Wheels

Used Goff 3672 Spinner Hanger With 4 Blast Wheels for sale. This unit includes the following features:

  • Inside cabinet is 36″ wide  x 72″ high
  • 4- 15hp blast wheels with VFD’s
  • 2000lb hook capacity 
  • In nice condition
  • In storage disassembled    
  • Approx 8500 hours of use

*As is, where is, WI*

Goff 3672 spinner hanger
Goff 3672 spinner hanger

*Lease option estimate based on 3 years $ 2,015/mo

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

by Alicia Guarasci Alicia Guarasci

6 Inch Belt Washer – Wash, Rinse & Blow Off

6 Inch Belt Washer – Wash, Rinse & Blow Off (2 Units Available)

Used 6 Inch Belt Washer for sale. This unit includes the following features:

  • Both belt washers never in production; brand new; test run at factory
  • JENFAB 6″ Belt Washer (wash / rinse / self-generated air blow off Top and Bottom surface).  
  • Overall  152” long x 86” wide x 88” high 
  • 480v 3 phase
  • Stainless steel construction of wash tank &  rinse tank – insulated
  • Electric heat to 140 degrees for each tank, 
  • Regen ambient blow off air top and bottom surface only
  • Variable speed drive for belt (1 to 4 FPM)
  • Stainless steel  belt, 6” wide 1/2″ x 1/2” 
  • Disk oil skimmer for wash tank 
  • Dosatron dispenser     
  • Digital temperature controller for 140F Tank Heat systems
  • Chip collection tray-  304 stainless steel 1/16 perforations        
  • Confinement screen inside around belt to prevent part blow off                              
  • SS Drain Header and Valves
  • Tank overflow and bottom tank drains plumbed to a common drain header
  • Side spray headers with stainless steel nozzles, one tied to bottom header, one tied to top header
  • Exhaust fan with damper mounted to the top of the machine enclosure
  • Removable belt enclosure side access panels, allows better access to bottom spray nozzles
  • Wash tank  190 gallons
  • Rinse tank  145 gallons
  • Tunnel opening 7” wide x 6” tall
  • Weight capacity – 500lbs evenly distributed
  • Owner ordered 2 belt washers for new cell assembly.
  • Determined upon arrival washers would not fit into cell.

                    

6 Inch Belt Washer
6 Inch Belt Washer
6 Inch Belt Washer
6 Inch Belt Washer
6 Inch Belt Washer
6 Inch Belt Washer

*As is, where is, loaded on truck, FOB Arizona.*

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

SUPERSTRUCTURE AND HOUSING:
Base:                       11 gauge formed 304 SS 
Walls:                      11 and 14 gauge 304 stainless steel   
Top Removable covers, 304 stainless steel  
Baffles Between all spray stations, 304 stainless steel  

 

       

TANKS:
Tank Material 11-gauge 304 stainless steel, double welded sloped bottoms to drains
Tank Covers large lift off, 304 stainless steel , with handles 
Drain Size:                 1 ¼”
Overflow Size:              1 ¼”
Water Inlet:                ¾” Copper sweat with manual fill valves for each tank, (SS optional)
Fluid Level Control Included for each Tank, Ball Float tied to main water header
Insulation  2″ fiberglass block between inner wall and outer skin, exterior surface 

is14 gauge mill grade 304 SS outer skin

Chip Baskets 6″ diameter  stainless steel mesh mounted with full drain pan  
Heat: 140° with thermostat-controlled stainless steel heaters 

               

 

SPRAY SECTION

WASH SECTION SPRAY SPECIFICATIONS:

Length: DOT 48″  with drain area and entrance vestibule
Pump Make:                  Gusher (or equal) all-iron vertical pump (No Seal)
Pump Capacity 50 GPM, 30 PSI, 3 HP
Tank Capacity:              190 Gallons
Solution  Temp 140 degrees with electric heating elements, 27 KW over the top Heating Element
Piping:                     Schedule 40 black iron positioned to properly direct spray, top and bottom 
Spray Nozzles: Non metallic clip on with SS V Jet Nozzles, Nozzles Easily adjusted to angle Spay Pattern
Level Control Ball Float tied to main water header with shut off valve

                   

           

SPRAY SECTION

EACH ADDITIONAL RINSE OR INHIBIT ZONE SPRAY SPECIFICATIONS:

Length: DOT 36″ with drain area and entrance vestibule
Pump Make:                  Gusher (or equal) all iron vertical, Seal Less
Pump Capacity 50 GPM, 30 PSI, 3 HP
Tank Capacity:              145 Gallons
Solution Temperature 140 degrees with 27 KW electric heating elements, 
Piping:                     Schedule 40 black iron positioned to properly direct spray, top and bottom and 
Spray Nozzles: Nonmetallic clip on with SS V Jet Nozzles, Nozzles Easily adjusted to angle Spay Pattern
Level Control Ball Float tied to main water header with shut off valve
Return Belt Shroud A SS Shroud Encapsulates the Return Belt in Rinse section to prevent Drag over from Rinse to Wash Tank

 

AIR BLOW OFF 

SPECIFICATIONS:

Length: DOT 34″ Top over belt and Bottom between Belt Air Delivery
Motor 15 HP, 1750 RPM, TEFCBB with centrifugal Regen blower, 550 CFM 
Heat (Optional) 10 KW standard 
Air Knives Stainless steel construction with engineered slots for Air Delivery, Air Knives are Easily Adjustable for angle and height over and below the belt. Two Twelve (12) Inch Air knives positioned on top and On bottom (Side air blow off and heat for Blow Off is optional)
Note: Standard blow off has air flow from top and Bottom only.  Optional air flow from sides is available with appropriate increase of blower size and increase in heat (optional).
by Alicia Guarasci Alicia Guarasci

Wheelabrator 3.5 Cube Tumble Blaster

Wheelabrator 3.5 Cube Tumble Blaster with Dust Collector – Vintage

Used Wheelabrator 3.5 Cube Tumble Blaster with Dust Collector for sale. This unit includes the following features:

  • Rubber belt & barrel heads in great shape
  • New in 1967
  • Maintained by Wheelabrator
  • Bag house dust collector
  • 9930 hours
  • 230V
  • Buyer is responsible to dismantle and load truck       

*As is, where is, Albany, New York*

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

Wheelabrator 3.5 cube tumble blaster
Wheelabrator 3.5 cube tumble blaster
Wheelabrator 3.5 cube tumble blaster
Wheelabrator 3.5 cube tumble blaster
Wheelabrator 3.5 cube tumble blaster