by Alicia Guarasci Alicia Guarasci

Sweco FM-10 Vibratory Finisher

Sweco FM-10 Vibratory Finisher

Used Sweco FM-10 Vibratory Finisher for sale. Unit is in full operating condition, with a good lining, and has straight wall lining, and manual unload door. No control panel included. 2.5 HP motor has been fully rebuilt with new bearings and windings. This unit includes the following features:

  • Overall Diameter:   49″ 
  • Overall Height:   44″
  • Channel Width:  14″
  • Capacity:  8-10 cubic feet
  • Voltage:    230 /460 Volt / 3 Phase

Optional:

  • On / Off switch 
  • Control Panel with digital timer

Current picture of the machine before repairs:

Sweco

Lease option estimate based on 3 years $ 322/mo

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

by Alicia Guarasci Alicia Guarasci

Rotofinish ER- 0405 Vibratory Finisher

Rotofinish ER- 0405 Vibratory Finisher

Used Rotofinish ER- 0405 Vibratory Finisher for sale. Unit is in full operating condition, with a good lining, control panel, auto oil lubrication, and manual gate with internal separation. Screen opening of your choice.  This unit includes the following features:

  • Capacity:  5 cubic feet
  • Voltage:    230 /460 Volt / 3 Phase
  • Overall Diameter:     49″
  • Overall Height:        46.5″
  • Channel Width:      10.25″

Current pictures before repairs:

Rotofinish ER 0405
Rotofinish ER 0405

Lease option estimate based on 3 years $ 322/mo

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

by Alicia Guarasci Alicia Guarasci

Rebulit 20 Cube Vibratory Bowl

Rebulit 20 Cube Vibratory Bowl

Used Rebulit 20 Cube Vibratory Bowl for sale.  System is currently in rebuild. This unit includes the following features:

  • Lining in very good condition
  • New bearings, drive, springs, screen deck, covers, auto lube, auto compound, & settling tank.
  • Factory Certified with a Warranty
  • Giant Finishing Model GB-20 Spiral Bowl with Internal Separation Vibratory Deburring and Finishing Machine

Specifications:

  • Cubic Feet Process Capacity…20
  • Horsepower Motor….10
  • Polyurethane Lining Thickness…1″
  • Shipping Weight….6312 lbs
  • Floor Space……48 Sq. Ft
  • Maximum Load Capacity  .6000 lbs
  • Bowl Diameter….80″
  • Unload Height….40″
  • Channel Width – After Lining……17″
  • Channel Depth – Average….24″
  • Overall Height…56″
  • Overall Depth…85″
  • Load Height….50”

 *FOB point of manufacture, Chicago

Rebuilt 20

Standard Components: 

  • Heavy Duty Bowl and Base is of all welded steel construction reinforced by gusset plates. The bowl is stress relieved then shot-peened for maximum durability and lined with urethane.
  • Precision Drive System consisting of heavy-duty spherical roller bearings mounted to the vertical drive shaft.
  • Nema-12 control panel including 0-1 hour process timer and lapsed time recorder. Control panel is jic approved and u.l. Listed.
  • Standard voltage: 460/3/60 cycle. Other voltage is available upon request.   
  • High efficiency motors
  • Drop – on weight segments (adjustable amplitude)
  • Tuned coil spring tub suspension
  • Parts discharge ramp with locking lever.
  • Removable cast urethane screen
  • Adjustable amplitude flywheel lead angle for fast finishing action adjustments.
  • Media discharge door
  • Compound inlet piping
  • Removable cast urethane drain plug
  • Electronic variable speed drive with digital tachometer: an ac inverter coupled directly to the motor controls the vibration frequency.  Push buttons for increase or decrease of the vibration frequency are in the main panel.  A digital tachometer provides a read-out of machine rpm

Lease option estimate based on 3 years $ 1,150/mo

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

by Alicia Guarasci Alicia Guarasci

Used Vibratory Tub

Used Vibratory Tub

Used Vibratory Tub for sale. This unit includes the following features:

  • Overall Dimensions:
      • Length 76"
      • Width 58"
      • Load Height 40”
      • Height 48"
  • Cubic Capacity 12 Cu. Ft.
  • Shipping Weight 4,510 lbs.
  • Floor Space 30.4 Sq. Ft.
  • Tub Dimensions:
      • Diameter of Tub (after lining) 22"
      • Length of Tub (after lining) 58"
  • Maximum Load Capacity 3,600 lbs.
  • Lining Material 1"
  • Vibration Frequency 900-1450 VPM
  • Machine new in 2014
Used Vibratory tub
Used Vibratory tub
Used Vibratory tub
Used Vibratory tub
Used Vibratory tub

DRIVE UNIT: 7.5 HP T.E.F.C. Hostile Duty High Efficiency, 460 volts, 3 phase, 60 cycle motor.

 

ELECTRONIC VARIABLE SPEED DRIVE WITH DIGITAL TACHOMETER: An AC inverter coupled directly to the motor controls the vibration frequency.  Push buttons for increase or decrease of the vibration frequency are in the main panel.  A digital tachometer provides a read-out of machine RPM.

 

MACHINE BASE is manufactured of steel beams and all welded construction for maximum rigidity. Floor mounting pads are furnished for 1″ floor mounting studs.

 

VIBRATORY MECHANISM: Balanced Suspension Drive is mounted on extra heavy duty Spherical roller bearings in precision turned housings securely attached to the vibratory tub. This mounting system and the long eccentric weights create even action through the processing chamber allowing continuous duty under the most adverse conditions. The tuned coil springs are mounted on urethane pads and are off-set front to rear allowing a natural rolling action with less input from the eccentric train. This natural action results in extended bearing and tub life cycles.  Bearings can be lubricated by an optional automatic fail-safe system.  Grease is injected into the bearings on a timed basis controlled by an adjustable solid-state pulse unit located within the control panel. The vibratory unit is driven by V-belt and pulley arrangement from power unit.  Variable amplitude is adjusted manually by adding additional weights to the eccentric bar. 

 

THE VIBRATORY TUB: is constructed of heavy reinforced steel tube gusseted its entire length.  The welded structure is stress relieved and shot-peened after welding to prevent fatigue.  Rear end of tube is equipped with a plug discharge door, for discharging media into container.  Drainage of contaminants from the machine is by means of perforated 1/8″ diameter holes at bottom of tube.  Effluent flows to drainage hoses leading to effluent container. 

 

JIC CONTROL PANEL U.L. Listed components housed in a NEMA type 12 enclosure. 460 voltage is transformed to 110 volts at operator controls. Includes start/stop push buttons, compound system selector switch and plug in receptacle, lapsed hour recorder, 0-6 hour process timer and fused disconnect.

INCLUDED IN BASE PRICE:

  1. A.C. Inverter variable speed drive with digital tachometer  
  2. Balanced Suspension Drive vibratory mechanism
  3. Polyurethane lining.
  4. Variable amplitude adjusted manually.
  5. High efficiency motors.
  6. Tub divider (adjustable/removable)

Lease option estimate based on 3 years $ 440/mo

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

by Alicia Guarasci Alicia Guarasci

New 3 Stage Finishing System

New 3 Stage Finishing System

New 3 Stage Finishing System for sale. This unit is ideal for small part on part process and corn cob dryer. It is still in its original crates.

Description:

The following equipment quoted is designed to be de-grease, burnish and dry parts with corn-cob. Parts are loaded into the inner channel of either of (2) vibratory over and under machines. Parts are de-greased then the machine is allowed to drain using vacuum assisted drains for pre-set amounts of time. The parts are then burnished and allowed to drain using the vacuum assisted drains, again for a pre-set amount of time. The solutions for both processes are run and collected separately and recirculated to their respective recirculation tank. Parts are dried for a pre-set amount of time and automatically discharged onto a vibratory separator conveyor. Parts and corn-cob are separated and corn-cob is returned to the corn-cob dryer channel by customers. All system processes and functions shall be automatic (with exception of loading) and controlled by a PLC with touch screen interface.

3 stage system

OU-10-15 FB COMBO SPIRATRON:

10 cubic feet maximum operating capacity in inner channel and 15 cubic feet maximum operating capacity in outer (dryer) channel.

Main building component of this tub is certified pressure vessel material.

Top and bottom access door safety switches.

Unique cartridge drive system with adjustable top and bottom eccentric weights.

10HP T-frame motor- 460/3/60. Motor mounted to non-vibrating base. Belt drive to main shaft at 1250 VPM.

Recirculating oil lubrication system for main machine bearing.

Painted Roto-Finishing “Adobe”

Channel A:

Flat bottom, U-shaped process channel, heavy duty welded steel construction, polyurethane lined, (50% additional lining in high wear areas), curved and ribbed wall processing channel.

(3) vacuum assisted drains with 4” polyurethane pop-in drain screens, including a collection tank with effluent retention capabilities. Tank will be divided with a diverter system to direct either the degreasing solution or burnishing solution to its respective side of the tank. Each side of the tank shall have a pump with float switch to transfer solution back to the recirculation tank.

Pneumatic unload door system allows parts to transfer directly to the dryer channel (channel B) upon activation of the unload door controlled by PLC.

Channel B: Flat bottom, U-shaped process channel, heavy duty welded steel construction, straight wall. Pneumatic unload door system to allow complete evacuation of parts and media. Parts and media transfer to a vibratory separator. Separated media is returned to the channel of the machine via customer.

Hot Water Heater for Corncob

Enclosed hot water recirculation system utilizing recirculation heater, pump, y-strainer, thermostat, site gauge and all necessary couplings and plumbing.

Compound flow-through system

Automatic mixing and metering of compound and water insure maximum cleanliness of media and parts. System is composed of an electrically-operated variable delivery compound pump which injects the concentrate into a controlled-flow water line. Both compound and water flow have simple, resettable adjustments. The correct solution arrives automatically pre-mixed at the spray nozzles for dispersion into the parts/media mass (channel A only).

ADDITIONAL EQUIPMENT INCLUDED WITH THE OU-10-15 FB

  • Parts Loading Stand: Gravity work stand for emptying customer’s containers into the OU-10-15 vibratory machine.

OU-3-5 FB COMBO SPIRATION:

3 Cubic feet maximum operating capacity in inner channel and 5 cubic feet maximum operating capacity in outer (dryer) channel.

Main building component of this tub is certified pressure vessel material.

Unique cartridge drive system with adjustable top and bottom eccentric weights.

5HP T-frame motor, 460/3/60. Motor mounted to non-vibrating base. Belt drive to main shaft for 1250 VPM.

Manual grease lubrication for main machine bearing.

Pained Roto-Finish “Adobe”

Channel A:

Flat bottom, U-shaped process channel, heavy duty welded steel construction, polyurethane lined, (50% additional lining in high wear areas), curved and ribbed wall processing channel.

3 vacuum assisted drains with 4” polyurethane pop in drain screens, including a collection tank with effluent retention capabilities. Tank will be divided with a diverter system to direct either the degreasing solution or burnishing solution to its respective side of the tank. Each side of the tank shall have a pump float switch to transfer solution back to the recirculation tank.

Pneumatic unload door system allows parts to transfer directly to the dryer channel (channel B) upon activation of the unload door controlled by PLC

Channel B:

Flat bottom, U-shaped process channel, heavy duty welded steel construction, straight wall. Pneumatic unload door system to allow complete evacuation of parts and media. Parts and media transfer to a vibratory separator. Separated media is returned to the outer channel of the machine by customer.

3 stage system

Hot Water Heater for Corn-Cob

Enclosed hot water recirculation system utilizing recirculation heater, pump, y-strainer, thermostat, site gauge, and all necessary couplings and plumbing.

Compound flow-through system:

Automatic mixing and metering of compound and water to insure maximum cleanliness of media and parts. System is composed of an electrically-operated variable delivery compound pump which injects the concentrate into a controlled flow water line. Both compound and water flow have simple, resettable adjustments. The correct solution arrives automatically pre-mixed at the spray nozzles for dispersion into the parts/media mass. (channel A only)

ADDITIONAL EQUIPMENT INCLUDED WITH THE OU-3-5 FB:

1-Plastic 30 Gallon Drum Dumper:

Loading system consisting of a tilt dumper. Dumper discharge height will be suitable for discharge into inner channel of the OU-3-5 machine.

2 RECIRCULATION TANKS:

1 150-gallon capacity, stainless steel, degreasing compound recirculation tank and (1) 150-gallon capacity, stainless steel, burnishing compound recirculation tank. Includes tank, filter system, recirculation pump automatic makes up system and controls.

2 OPTIONAL COALESCING SYSTEMS:

Coalescing system provides removal of free floating, dispersed and loosely emulsified tramp oils from tanks, complete with the pump and controls.

1 NEMA 12 SYSTEM CONTROL PANEL:

PLC and touch screen interface for multi-step process. 460/3/60, 115-volt control circuit, fused disconnect, overload motor protection, on/off vibratory control, solution system controls, machine hour meter and process timer.

Integration of 2 Customer Equipment

Included motor control and sequencing with machines operation, Fundamental capability of the separation and media handling system is the customers responsibility

3 stage system
3 stage system

 Lease option estimate based on 3 years $ 3,088/mo

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

by Alicia Guarasci Alicia Guarasci

Almco DB-2224-2 Barrel Tumbler

Almco DB-2224-2 Barrel Tumbler

Used Almco DB-2224-2 Barrel Tumbler for sale. This unit includes the following features:

  • 22″ diameter x 12″ long compartments (2 total)
  • 5.6 total capacity
  • 2 compartment barrel tumbler, with 2 manual doors, control panel,  manual screen / trays.

*Rebuilt, FOB  Kalamazoo MI

For purchasing information, email sales@blast-wash-systems.com or Contact Us.

*This unit will be rebuilt. Photos shown is before rebuild.* 

Almco
Almco