• sales@blast-wash-systems.com
  • (585) 384-9025

Blast & Wash Systems is a distributor of the most comprehensive parts finishing,
metal prep, surface prep, cleaning, and air filtration equipment.

Used Equipment

All Used Equipment is quoted “as is” and “where is”, unless specified otherwise.

  • All
  • Blast Equipment
  • Parts Washers
  • Spray Booths & Ovens

Ramco Dip Tank

Ramco Dip Tank (Used) Our Price:  $3,900 As is, where is Springfield, NJ Standard Features:  Inside Dimensions: 18" x 22" Model MK16EUSS Serial # JB1308-02 Single Stage Immersion Dip Tank cleaning system with 3” stroke 150 lb/ max load 220V New in 2002 at $ 20,400 Baskets: Yes Electrically heated at 140℉   Purchase Order, [...]

Wheelabrator Table Blast

60" Wheelabrator Table Blast System WMT-60 Shot Blaster with Dust Collector Our Price:  $24,900 As is, where is Milford, CT 2 Blast Wheels Currently Used Daily with Onboard Dust Collector Purchase Order, Deposit, Final Balance needs to be made out and paid to: Blast & Wash Systems 9401 State Rte 21 Wayland, NY 14572   [...]

Viking Table Blast

72" Viking Table Blast System Shot Blaster with Dust Collector Our Price:  $45,000 As is, where is Milford, CT 2 Blast Wheels Currently Used Daily with Dust Collector Purchase Order, Deposit, Final Balance needs to be made out and paid to: Blast & Wash Systems 9401 State Rte 21 Wayland, NY 14572   Demo and [...]

Coyote Air Belt Blast

Coyote 1.25 Air Belt Blast & Recovery System complete with 600 CFM dust collector Our Price:  $29,000 Standard Features:  (3) Blast Nozzles System new in 2021 Max Workload 150lb Electrical 230v 3 Phase Continuous Molded Rubber Belt VFD on mill belt drive Low Noise Level Safety Interlocks Reversing Mill Belt Automatic Timer Controls Low Profile [...]

Cell Jet Ransohoff Table Washer

Cell Jet Ransohoff Table Washer In stock – Cell Jet Features: Wash, Rinse, Blow-off Process in Single Cabinet processing your parts in up to 24” diameter x 18” tall work envelope, with a maximum part weight of 40 lbs Siemens S7-1200 PLC Stainless Steel Construction Footprint:  5’6” wide x 5’6” long x 8’6” high The [...]

JenFab Large Dip Tank w/ oil removal system

JenFab Large Dip Tank w/ oil removal system Our Price:  $16,550 Standard Features: JenFab design – less than 200 hours on it Inside Dimensions:  56” wide x 30” x 24” High Stainless Steel Construction Single Stage Immersion Dip Tank cleaning system with 3” stroke. New in 2019 Machine well maintained/ in excellent condition. Process Platform [...]

Compact mini belt washer – Stoelting

Compact mini belt washer Stoelting show demo units Features: 6” and 12” belt widths Ideal for cleaning small parts such as: screw machine products, stampings and bearings Stainless steel construction for long life Automatic loading, cleaning and unloading Small footprint (less than 9 sq. ft.) for work cell applications Portable with forklift pockets and optional [...]

Powder Coating Oven

Powder Coating Oven Dimensions: Interior: 16’ wide x 30’ deep x 10’ high Exterior: 19’5” wide x 30’8” long x 17’4” tall Nominal Door Dimensions: 16 Feet Wide x 10 Feet High TYPE: Manual Sliding Door (side wall) Natural gas burner provides 1,500,000 BTU/HR Operating temperature – 450 degrees 6” touchscreen with 4 batch modes [...]

JenFab Large Dip Tank

JenFab Large Dip Tank w/ Oil Removal System Used JenFab Large Dip Tank w/ Oil Removal System for sale. This unit includes the following features: JenFab design – less than 200 hours on it Inside Dimensions: 56” wide x 30” x 24” High Stainless Steel Construction Single Stage Immersion Dip Tank cleaning system with 3” stroke.  [...]

Demo model – Sonicor Ultrasonic System

Demo model Sonicor Ultrasonic System– Wash, Rinse and Dry   MODEL: URD-914 Demo model Sonicor System for sale. Sonicor self-contained ultrasonic parts cleaning station with three (3), 9”x 14”x 12” process chambers: Stage 1 – Heated Immersion Ultrasonic clean: Tank I.D.- 9”x 14”x 12” deep Capacity – 6 gallons Material – 304 stainless steel Heat – [...]

Blast Cabinet w/ Onboard Reclaim & Dust Bag

Blast Cabinet with Onboard Reclaim & Dust Bag for sale. This unit includes the following features: Siphon system 400 Reclaim   14 Gauge Reinforced Continuously Welded Primed and Painted. Corrosion Resistant Dimensions: 44″W x 26″D x 30″H Double Walled Doors Safety Door Interlocks Self Adjusting Door Latches Knife Edge Self Sealing Full Gaskets Full Length Hinges [...]

6 Inch Belt Washer – Wash, Rinse & Blow Off

6 Inch Belt Washer - Wash, Rinse & Blow Off (2 Units Available) Used 6 Inch Belt Washer for sale. This unit includes the following features: Both belt washers never in production; brand new; test run at factory JENFAB 6" Belt Washer (wash / rinse / self-generated air blow off Top and Bottom surface).   Overall  [...]

Used JRI Dip Tank – New in 2011

Used JRI Dip Tank This used JRI Dip Tank includes the following features: Inside Dimensions: 58” wide x 32” x 36” high  Mild Steel Construction  Single Stage Immersion Dip Tank cleaning system with 3” stroke.  New in 2011  Machine well maintained/ in excellent condition.  Capacity 483 gallons at 45” Solution Height  With belt oil skimmer […]

For more information, please Contact Us

VH

Demo and Used Equipment Disclaimer

Warranty:  The goods described herein are preowned used goods and are offered “as is, where is” and “with all faults” unless otherwise noted.  Seller makes no warranties of any kind whatsoever, expressed or implied, as to merchantability and fitness for any purpose, including safety, condition or quality.  All specifications and descriptions of said goods are approximate only. The Seller makes no warranties or guarantees as to quality, condition, usability, weight, measurement, age, model, mechanical condition, performance or other specifications.  It is the Buyers responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods conform to Buyer’s requirement(s). 

Machine use and safety

Buyer acknowledges that the goods described herein as “demo” or “used” equipment are neither designed nor manufactured by the seller. Seller has no knowledge of, or control over the prior use or misuse of said goods, nor does the Seller have knowledge or control over the future application of these goods by the Buyer.  It is the Buyer’s (user’s) responsibility to provide proper safety devices, equipment and instructions for any use and to take all necessary steps to conform to all federal, state or local government safety standards including OSHA.

Indemnification

Buyer agrees to indemnify, hold harmless and defend Seller of and from all claims, liabilities and damages from any accidents or other incidents involving the goods described herein.

Top