Used Clemco 6-Station Index Blast Cabinet

Clemco #205A (2023) Blast Cabinet

Used Blast Cabinet in Excellent Condition is now available for purchase, manufactured by Clemco brand.

Specs

Size: Nominal 5′ x 5′ x 7.5′ using steel frames and panels (60″ x 60″ x 66″ total)

Maintenance doors on both ends

LED Lighting supplied on-unit

Part Entrance: Vertical lift entrance & exit located on the front

Wear Protection: Replaceable rubber curtains provided

Used Hours: 2,260

Automation Equipment

Indexing Turntable: Nominal 30″ Diameter with Dual Index

Index Controls: Two (2) touch sensor index switches provided

Vertical Oscillator: One (1) vertical oscillator for nozzle manipulation, 24in stroke

Part Satellites: Six (6) rotating satellites provided

Blast Station: One (1) blast station provided

Blow-Off Station: One (1) air blow-off station provided

Blast Guns

Sixteen (16) suction guns are provided

Nozzle Material: Boron Carbide

Nozzle Size: 3/8″ wide spray are provided

Orifice Size: #5 are provided

Air Requirements: Nominal compressed air

Requirement, 484 (416) CFM at 60psi w/ air blow-off **

** subject to change pending blow-off, nozzle size and blast pressure

History & Upgrades

Customer Parts Run-Off

Number of Days at Factory: One (1) workday to run verification of both blast process and production rates

Robot Ready Package

Machine is equipped with a “robot ready” package to facilitate the future addition of a pick and place robot. The package also includes the below specifications for the future integrator

a. Two (2) additional safetyy rated isolation relays, controlled from the machine safety PLC. Two (2) safety rated inputs are also available on the back of the machine if customer desires to use them.

b. No additional power distribution from the main control panel is provided

c. Clench will provide eight (8) input logical bits and eight (8) output logical bits for the sequential status and interlocks of the blasting sequence (per customer requirements). They will be communicated via Excel spreadsheet. Clemco will have an HMI display showing the eight (8) inputs and eight (8) outputs, labeled per the customer Excel spreadsheet. These sixteen (16) logical bits can be used in any desired manner for further system integration.

d. Clemco can provide a new PLC program for robot integration in coordination with the integrator if desired. This will need to be quoted separately at time of upgrade. 

Notes for the Integrator:

a. Accuracy of the 30in diameter indexing table will be important as it relates to the customer’s fixture. Average accuracy for the satellite position is +/- 1/32 inches, but max is 1/8″ deviation

b. Satellites spin freely

Cost in 2023 (Release Year) : $354,000

OUR PRICE: $267,000

Terms:  Customers are responsible for dismantling and loading onto their truck.

Full payment is required prior to shipping (see Financing page). FOB, New Hampshire. Purchase order, deposit & final balance needs to be made out to:

Blast & Wash Systems

9401 State Route 21, Wayland NY 14572

Demo and Used Equipment Disclaimer: The goods described herein as “Demo” or “Used” are offered “as is”, “where is” unless otherwise noted. Blast and Wash Systems (designated herein “seller”)  makes no warranties of any kind whatsoever, expressed or implied, or merchant-ability and fitness for a purpose. All specifications and descriptions of said goods are approximate only. It is the Buyers responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods conform to Buyer’s requirements.

Machine Use and Safety: Buyer acknowledges that the goods described herein as “demo” or “used” equipment as neither designated nor manufactured by the seller. Seller has no knowledge of, or control over the prior use or misuse of said goods, nor does the Seller have knowledge or control over the future application of these goods by the Buyer. It is the Buyer’s (user’s) responsibility to provide proper safety devices, equipment, and instructions for any use and to take all necessary steps to conform to all federal, state, or local government safety standards including OSHA.

Indemnification: Buyer agrees to indemnify, hold harmless and defend Seller of and from all claims, liabilities and damages from any accidents or other incidents involving the goods described herein.