Clemco #205A (2023) Blast Cabinet

Used Blast Cabinet in Excellent Condition is now available for purchase, manufactured by Clemco brand.

Specs

Size: Nominal 5′ x 5′ x 7.5′ using steel frames and panels (60″ x 60″ x 66″ total)

Maintenance doors on both ends

LED Lighting supplied on-unit

Part Entrance: Vertical lift entrance & exit located on the front

Wear Protection: Replaceable rubber curtains provided

Used Hours: 2,260

Automation Equipment

Indexing Turntable: Nominal 30″ Diameter with Dual Index

Index Controls: Two (2) touch sensor index switches provided

Vertical Oscillator: One (1) vertical oscillator for nozzle manipulation, 24in stroke

Part Satellites: Six (6) rotating satellites provided

Blast Station: One (1) blast station provided

Blow-Off Station: One (1) air blow-off station provided

Blast Guns

Sixteen (16) suction guns are provided

Nozzle Material: Boron Carbide

Nozzle Size: 3/8″ wide spray are provided

Orifice Size: #5 are provided

Air Requirements: Nominal compressed air

Requirement, 484 (416) CFM at 60psi w/ air blow-off **

** subject to change pending blow-off, nozzle size and blast pressure

History & Upgrades

Customer Parts Run-Off

Number of Days at Factory: One (1) workday to run verification of both blast process and production rates

Robot Ready Package

Machine is equipped with a “robot ready” package to facilitate the future addition of a pick and place robot. The package also includes the below specifications for the future integrator

a. Two (2) additional safetyy rated isolation relays, controlled from the machine safety PLC. Two (2) safety rated inputs are also available on the back of the machine if customer desires to use them.

b. No additional power distribution from the main control panel is provided

c. Clench will provide eight (8) input logical bits and eight (8) output logical bits for the sequential status and interlocks of the blasting sequence (per customer requirements). They will be communicated via Excel spreadsheet. Clemco will have an HMI display showing the eight (8) inputs and eight (8) outputs, labeled per the customer Excel spreadsheet. These sixteen (16) logical bits can be used in any desired manner for further system integration.

d. Clemco can provide a new PLC program for robot integration in coordination with the integrator if desired. This will need to be quoted separately at time of upgrade. 

Notes for the Integrator:

a. Accuracy of the 30in diameter indexing table will be important as it relates to the customer’s fixture. Average accuracy for the satellite position is +/- 1/32 inches, but max is 1/8″ deviation

b. Satellites spin freely

Cost in 2023 (Release Year) : $354,000

OUR PRICE: $267,000

Terms:  Customers are responsible for dismantling and loading onto their truck.

Full payment is required prior to shipping (see Financing page). FOB, New Hampshire. Purchase order, deposit & final balance needs to be made out to:

Blast & Wash Systems

9401 State Route 21, Wayland NY 14572

Demo and Used Equipment Disclaimer: The goods described herein as “Demo” or “Used” are offered “as is”, “where is” unless otherwise noted. Blast and Wash Systems (designated herein “seller”)  makes no warranties of any kind whatsoever, expressed or implied, or merchant-ability and fitness for a purpose. All specifications and descriptions of said goods are approximate only. It is the Buyers responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods conform to Buyer’s requirements.

Machine Use and Safety: Buyer acknowledges that the goods described herein as “demo” or “used” equipment as neither designated nor manufactured by the seller. Seller has no knowledge of, or control over the prior use or misuse of said goods, nor does the Seller have knowledge or control over the future application of these goods by the Buyer. It is the Buyer’s (user’s) responsibility to provide proper safety devices, equipment, and instructions for any use and to take all necessary steps to conform to all federal, state, or local government safety standards including OSHA.

Indemnification: Buyer agrees to indemnify, hold harmless and defend Seller of and from all claims, liabilities and damages from any accidents or other incidents involving the goods described herein.

Blast-It-All Tumble Blast System with Dust Collector

BB-2 22″ Wide x 30″ Diameter

Only 264 hours of production on the machine – excellent condition

CABINET: Constructed of high-quality 12-gauge steel

BARREL: Constructed of a 11-gauge carbon steel. Access to parts loading and unloading is through a removable door, held in place by cam type clamps for security. Barrel is 22″ Width x 30″ Diameter with (2) Blast Guns – #6

CABINET DOOR: One, full opening, swing type mounted on heavy-duty hinges

GUN: The BB-2 uses two (2) stationary production-style guns, suction feed. A number six air-orifice and carbide nozzle is installed as standard, other sizes and types are available depending upon compressed air supply. All hoses are 5/8″ ID, lightweight, clear, flexible, and abrasive resistant. Media/Air Blast ration is obtained by a fixed media feed valve.

RECLAIM SYSTEM: High efficiency centrifugal type, with an adjustable air wash and trash screen to trap large debris.  A high-performance blower is used to convey media and blasting by-products to the reclaim for separation.

M4DC – 4 Cartridge 700 CFM Dust Collector:  The M series collectors are of cartridge type with auto cleaning and are designed and built for continuous duty operation. The units are designed for use with abrasive blast systems.

CONTRUCTION: Standard construction of the unit is 11-gauge hot rolled steel,reinforced to maintain structural integrity to 15″ w.g. all wiring, air piping, solenoids and valves are mounted externally. Inlet sizes 6″ through 8″.

FILTER CARTRIDGES: Filters are replaceable cartridges. Each filter has approximately 103 square ft of filter media. Pulse cleaning: an adjustable timer for controlling the “on”and “off” time of the air pulse is enclosed in a Nema-12 control panel. A Magnahelic gauge is provided for monitoring the differential pressure drop. Magnahelic to show differential pressure through dust collector

FEATURES:

D.C. Variable Speed Control

Sequence Lights

Panel Disconnect

Front-Unloading Door

Cost of BB-2 with M4 Dust Collector : $19,500

Terms: Full payment prior to shipping. FOB, Massachusetts.
Purchase Order, Deposit, Final Balance needs to be made out and paid to:

Blast & Wash Systems
9401 State Rte 21
Wayland NY 14572

Demo and Used Equipment Disclaimer: The goods described herein as “Demo” or “ Used” are offered “as is”, “where is” unless otherwise noted. Blast & Wash Systems (designated herein “seller”) makes no warranties of any kind whatever, expressed or implied, or merchant-ability and fitness for a purpose. All specifications and description of said goods are approximate only. It is the Buyers responsibility to inspect the
goods and ascertain if the specifications, description and condition of the goods conform to Buyer’s requirements.

Machine use and safety
Buyer acknowledges that the goods described herein as “demo” or “used” equipment are neither designed nor manufactured by the seller. Seller has no knowledge of, or control over the prior use or misuse of said goods, nor does the Seller have knowledge or control over the future application of these goods by the Buyer. It is the Buyer’s (user’s) responsibility to provide proper safety devices, equipment and instructions for any use and to take all necessary steps to conform to all federal, state or local government safety standards including OSHA.

Indemnification
Buyer agrees to indemnify, hold harmless and defend Seller of and from all claims, liabilities and damages from any accidents or other incidents involving the goods described herein.